Li-09YS(St)CY 1 x 2 x 0.34 mmq
Description
Description
Standards
-
ProductCSA C22.2 N° 214-02; UL 444
Application
The cable WINDLINK® CAN BUS was specifically designed for wind turbines. These cable is used where torsion resistance is required.
Characteristics
Characteristics
구조적 특성
구조적 특성
구조
1 x 2 x 0.22
도체 재료
베어 구리 와이어
절연
폼 스킨
Insulation colour
white - green
Lay Up
Pair
스크린
Tinned copper - 80% optical coverage
내피
Thermoplastic coumpound
피복
PVC compound
Sheath colour
Black - RAL 9005
치수
치수
Nominal outer diameter
7.5 mm
Conductor diameter (mm)
Copper content
- kg/km
Diameter over braid
- mm
Inner sheath thickness
- mm
Insulation sheath thickness
- mm
Maximum cable diameter
- mm
Minimum cable diameter
- mm
Nominal outer sheath thickness
- mm
도체 단면적
- mm²
무게(근사치)
- kg/km
전기적 특성
전기적 특성
Minimum insulation resistance
100 MOhm.km
Resistance of inner conductor (DC)
- Ohm/km
Max. Electrical Resistance AC 60Hz 70°C
- Ohm/km
Max. transfer impedance at 10MHz
10 mOhm/m
Max. Electrical Resistance AC 60Hz 90°C
- Ohm/km
Inductive reactance
- Ohm/km
Operating capacitances
- mF/km
Permissible short circuit current
- kA
Test voltage AC at 50hz conductor /conductor
1500 V
Test voltage AC at 50hz conductor/screen
1500 V
Operating voltage
250 V
Characteristic impedance
- Ohm
Permissible current rating in open air
- A
기계적 특성
기계적 특성
Torsion stress
45 °/m
Maximum tensile strength
- N/mm2
사용 특성
사용 특성
Gases corrosivity
연기밀도
Oil resistance
U.V resistance
Ozone resistance
Max. conductor temperature in service
- °C
Short-circuit max. conductor temperature
- °C
Installation temperature, range
-40 ... 85 °C
操作温度范围
-30 ... 75 °C
Minimum Bending Radius during installation
10 (xD)
Fire retardant
FT4 (UL 1685)
Resources
Resources
Our websites
Select your country to find our products and solutions
-
Africa
- Africa
- Ghana
- Ivory Coast
- Morocco
- North West Africa
- Americas
- Asia
- Europe
- Oceania