Description
Description
Standards
-
Product넥상스 규격
Application
The cable WINDLINK® Control LSOH shielded was specifically designed for wind turbines. These cable is used where high flexibility, torsion- and oil-resistance are required. It is therefore a suitable connection for electrical equipments.
Product characteristics
- Suitable for torsion up to ± 150°/m (from -20°C up to 50°C)
- Vibration resistant
- Low smoke according to IEC 61034-2
- Flame retardant according to IEC 60332-1
- Oil resistant according to EN 60811-2-1 and special oils used in wind turbines
- Halogen free according to IEC 60754
- UV resistant according to IEC 60068-2-5
- Ozone resistant according to EN 60811-2-1 clause 8
Characteristics
Characteristics
구조적 특성
구조적 특성
구조
2x1,5
도체 재료
Bare copper class 5
절연
할로겐 프리 복합체
Insulation colour
Black numbered
스크린
Tinned copper braid, coverage ≥ 80%
피복
할로겐 프리 복합체
Sheath colour
Black - RAL 9005
치수
치수
코어수
2
도체 단면적
1.5 mm²
Conductor diameter (mm)
Insulation sheath thickness
- mm
Nominal outer sheath thickness
- mm
Diameter over braid
5.3 mm
Minimum cable diameter
- mm
Maximum cable diameter
- mm
Nominal diameter
7.1 inches
무게(근사치)
- kg/km
Copper content
98 kg/km
전기적 특성
전기적 특성
20° C에서 최대 도체 DC저항
13.3 Ohm/km
Max. Electrical Resistance AC 60Hz 70°C
- Ohm/km
Max. Electrical Resistance AC 60Hz 90°C
- Ohm/km
Inductive reactance
- Ohm/km
Insulation resistance at 20°C
100 MOhm.km
Operating capacitances
- mF/km
Permissible short circuit current
- kA
정격전압 Uo/U (Um)
300/500 V
시험전압
1500 V
Transfer impedance
10
Permissible current rating in open air
- A
기계적 특성
기계적 특성
Torsion stress
100 °/m
Maximum tensile strength
- N/mm2
사용 특성
사용 특성
Gases corrosivity
IEC 60754-2
Fire retardant
IEC 60332-1-2
Oil resistance
EN 60811-2-1
연기밀도
IEC 61034-2
U.V resistance
IEC 60068-2-5
Ozone resistance
EN 60811-2-1
Max. conductor temperature in service
- °C
Short-circuit max. conductor temperature
- °C
Ambient installation temperature
- °C
Ambient dynamic operating temperature, range
-30 ... 80 °C
Ambient static operating temperature, range
-40 ... 80 °C
Minimum bending radius, occasionally moving
20 (xD)
Minimum bending radius, fixed installation
10 (xD)
Our websites
Select your country to find our products and solutions
-
Africa
- Africa
- Ghana
- Ivory Coast
- Morocco
- North West Africa
- Americas
- Asia
- Europe
- Oceania