LiHCH 3G1.0
Description
Description
Standards
-
ProductNexans specification
Application
The cable WINDLINK® Data LSOH shielded was specifically designed for wind turbines. These cable is used for data transmission where high flexibility, torsion- and oil-resistance are required. It is therefore a suitable connection for electrical panels and sensors.
Product characteristics
- Suitable for torsion up to ± 150°/m (from -20°C up to 50°C)
- Vibration resistant
- Low smoke according to IEC 61034-2
- Flame retardant according to IEC 60332-1-2
- Oil resistant according to EN 60811-2-1 and special oils used in wind turbines
- Halogen free according to IEC 60754
- UV resistant according to IEC 60068-2-5
- Ozone resistant according to EN 60811-2-1 clause 8
Characteristics
Characteristics
Construction characteristics
Construction characteristics
Construction type
3 G 1.0
Conductor material
Bare copper class 5
Insulation
Halogen free compound
Lay Up
Please request detailed data sheet
Insulation colour
Black numbered Yellow/Green
Screen
Tinned copper braid, coverage ≥ 65%
Outer sheath
Halogen free compound
Sheath colour
Black - RAL 9005
Dimensional characteristics
Dimensional characteristics
Number of cores
3
Conductor cross-section
1 mm²
Conductor diameter (mm)
-
Insulation sheath thickness
- mm
Diameter over braid
- mm
Nominal outer sheath thickness
- mm
Minimum cable diameter
- mm
Maximum cable diameter
- mm
Nominal outer diameter
6.6 mm
Approximate weight
76 kg/km
Copper content
- kg/km
Electrical characteristics
Electrical characteristics
Max. DC resistance of the conductor at 20°C
- Ohm/km
Max. Electrical Resistance AC 60Hz 70°C
- Ohm/km
Max. Electrical Resistance AC 60Hz 90°C
- Ohm/km
Inductive reactance
- Ohm/km
Operating capacitances
- mF/km
Permissible short circuit current
- kA
Maximum operating voltage
-
Nominal Voltage
250 V
Test voltage
1500 V
Transfer impedance
25
Permissible current rating in open air
- A
Mechanical characteristics
Mechanical characteristics
Mechanical stress
15 N/mm2
Torsion stress
150 °/m
Maximum tensile strength
- N/mm2
Usage characteristics
Usage characteristics
Flame retardant
IEC 60332-1-2
Gases corrosivity
IEC 60754-1; IEC 60754-2; EN 50525-1 Anx C
Smoke density
IEC 61034-2
Oil resistance
IEC 60811-2-1
U.V resistance
IEC 60068-2-5
Ozone resistance
IEC 60811-100 & IEC 60811-403
Max. conductor temperature in service
- °C
Short-circuit max. conductor temperature
- °C
Ambient installation temperature
- °C
Operating temperature, range
-40 ... 90 °C
Ambient dynamic operating temperature, range
-30 ... 80 °C
Ambient static operating temperature, range
-40 ... 80 °C
Minimum bending radius, occasionally moving
6 (xD)
Minimum bending radius, fixed installation
4 (xD)
Resources
Resources
Documentation
Selling & delivery Information
Marking e.g.
NEXANS INTERCOND - Week/Year of production - WINDLINK LiHCH n x yy mm²
n: number of conductors
yy: section of conductor
Meter marking
Our websites
Select your country to find our products and solutions
-
Africa
- Africa
- Ghana
- Ivory Coast
- Morocco
- North West Africa
- Americas
- Asia
- Europe
- Oceania