FLAMEX DTREN150068 EN 50382-2 Type FFXS 1.8/3 kV 1x120 120°C
FLAMEX DTREN150068 EN 50382-2 Type FFXS 1.8/3 kV 1x120 120°C
FLAMEX
SHIELDED HIGH TEMPERATURE EXTRA-FLEXIBLE POWER CABLES
FLAMEX® EN 50382-2 FFXS shielded power cables are designed with extra flexible conductors as per jumper cables. They are used for installations where enhanced electrical screening (EMC) is required. Able to withstand higher operating temperatures, these silicone-based cables allow to save cable weight.
- Produkt ref. : 13117546
- EAN : 3427580850301
Beschreibung
Beschreibung
Normen
-
ProduktEN 45545-2 (HL3); EN 50382-2; IEC 60228
Application
These cables are designed and dedicated to be used on rolling stock equipment where high temperature is required to save cable weight.
Thanks to its high flexibility, these cables are frequently installed on locomotive equipement with low bending radius.
Construction
- Conductor
Extra flexible class 6 copper according to IEC 60228
* tinned copper for 120°C Class
* plain copper for 150°C Class - Insulation
Cross-linked silicone type EI 111 according to EN 50382-1 - Separator
Unweaved tape - Screen
Tinned copper wire braid - Separator
Unweaved tape - Outer sheath
Cross-linked silicone type EM 107 according to EN 50382-1
Colour: black outer layer
Marking
FLAMEX SI - EN 50382-2 - Voltage rate (1800V or 3600V) - cross-section mm² - FFXS - temperature class (120°C or 150°C) - NEXANS 279 - week/year
Guide to use
Cabling rules are given according to EN 50343
- Minimum bending radius (static) : 4 x outer cable diameter
- Minimum bending radius (dynamic) : 6 x outer cable diameter
- Pulling tensible force (dynamic) during installation : 50 N/mm² of copper size
- Mechanical (static) tensible force : 15N/mm² of copper size
- Permissible current carrying capacities : value and calculation method are given in EN 50355
Standards
Construction according to EN 50382-2